Chain Of Command (Brazzers) - review by fu_q| Author | Post |
|---|---|
| lex von v Senior Member 2511 Posts 12/12 | Hi, I recently got my copy of "Anal Fanatic 2", and ran into a problem when playing the Jynx Maze scene, at around 2h37m until 2h44m I get various pixelation, jumps and image defects. When playing it with the computer DVD drive, I get stuck on various positions of the file VTS_01_5.VOB. So I confronted the disc with actually two different rental discs of the same title, and both had issues at roughly the same spot. Does anyone have a working version of that DVD? The DVD I have has its files mastered on February 25th 2011. [Link] |
| bignaturals Member 60 Posts 9/11 | |
| lex von v Senior Member 2511 Posts 12/12 | It's not like in the olden VHS days, where the tape became worn out. It was a brand-new DVD, and the two DVDs I had to compare it at least looked pristine. (same story, btw, with "Big Anal Asses 2" from HardX, again at the Jynx Maze scene Anyone got a DVD of AF2 that plays this scene without hickup? Or am I the only one still using DVDs? |
| SyberKhanX Member 69 Posts 1/08 | Avoid the urge to stick a nozzle of compressed air in there though, as it can be too much for the delicate internals. You can buy a "DVD lens cleaner" disc at most electronics stores, but in my experience, those are basically worthless as well. Might be time to upgrade to a dvd/blu-ray player, as you can get a decent one for under $100 these days. If your dvd player isn't 5+ yrs old though, then it might just be a smudge on the disc. Take a soft cotton cloth or microfiber cloth and wipe the disc, moving from the inside of the disc outward. NOT in a circular motion, as most assume is correct. If that doesn't work, I don't know. Good luck!! |
| lex von v Senior Member 2511 Posts 12/12 | Don't think it's the player. I tried it with my Sony Blu-ray player (didn’t work), so i went to the computer (where I have 4 different DVD drive models installed), where I can practically read everything. Some damaged discs work better with one model, some with the other one... Also, the disc was brand new, with no scratches etc. whatsoever, I would guess it’s a mastering error, e.g. some faulty or insufficient error correction information present on the disc. More information on testing discs: [link removed: no link shorteners] |
| Use the code below to link to this topic or a specific post. |
| URL of this thread |
| Link to this post with HTML |
| Link to this post with Forum Code |