Professionell repro houses don't do smaller quantities than 500 normally.
I think the best thing for you would be an automatic burner for your home.
Little Puck Interview| Author | Post |
|---|---|
| StevenPHH New Member 4 Posts 4/05 | Hello everybody, So here is my first post.
I have a small amateur, foot fetish site and I have been burning our DVDs 1 at a time (pain in the ass).
[Link] |
| juha Senior Member 2752 Posts 3/05 | |
| sir wankalot Member UK 904 Posts 5/03 | Here's one that copies 1 dvd onto 9. There are cheaper ones with less drives. |
| StevenPHH New Member 4 Posts 4/05 | |
| cykedout Member Ireland 245 Posts 8/00 | UK -- at SVP - http://www.blankdiscshop.co.uk/acatalog/duplicators.html |
| Bill All-Star Member 5334 Posts 6/00 | For your quantity, it sounds like one of the 3 50 disc capacity duplicators ($1,495 - 2,295), might be the best bet. These duplicators only copy one at a time, but they have a self feeding hopper, so you just load the machine and let it run until it runs out of discs. The other duplicators that will copy up to 16 discs will copy more discs simultaneously, but you will need to swap out the discs after each group has finished burning. For example, if you want to burn 24 discs on the 8 disc replicator, after each 8 burn, you need to remove them and put in new blanks. But, if you are watching over it, it will burn 24 discs in the same time as the ones with the hopper will burn 3 discs. On the other hand, the one with the hopper will burn all 24 completely unattended. It will just take 8 times as long to do as an 8 disc replicator. |
| jamesn Senior Member Cambridge, MA 750 Posts 1/04 | honestly, any duplicator under $1000 is going to be slow, unreliable and cost you time sitting around feeding it discs. if your time is valuable, send it out-they'll take care of labelling the cases and the stuff a monkey could do. |
| StevenPHH New Member 4 Posts 4/05 |
| Use the code below to link to this topic or a specific post. |
| URL of this thread |
| Link to this post with HTML |
| Link to this post with Forum Code |