New Pornstar Interviews - [more]
Little Puck Interview

"I’m a woman of varied tastes. I can get off to a lot of different things. I enjoy switching it up."
All Forums > Tech Talk > Tech Talk Forum Page 32 > Does anyone know of a (preferably free) benchmark
AuthorPost
conquistador
Deactivated User

Hellhamster.
2947 Posts
10/03
Posted - Aug 6 2007 : 2:44AM
program.
I just want to see how my computer is holding up.
Also do any of you folks have a recommendation for thermal paste/heat sink grease.
I think it is about time to change my Pentium heat sink/fan assembly. I have only done this once before and it was with a much older computer.
The problem is the heat sink/fan are incredibly dusty. So dusty I can't even clean it with compressed canned air.
Thank you.
Hardware All-Star Supporter
All-Star Member

Your other left
14595 Posts
3/02
Posted - Aug 6 2007 : 4:11AM
Regarding thermal paste - Arctic Silver worked for me.
LubeNLuv
Senior Member

1854 Posts
3/06
Posted - Aug 6 2007 : 8:23AM
willywilly
Member

Activated Member
662 Posts
2/05
Posted - Aug 7 2007 : 11:51AM
You might like to read:
Arctic Silver instructions
and
How To Correctly Apply Thermal Grease.
If you are considering a vacuum cleaner - beware. I've done it, and gotten away with it. But the word is: vacuum cleaners create a lot of static. Static is a Bad Thing.

conquistador
Deactivated User

Hellhamster.
2947 Posts
10/03
Posted - Aug 7 2007 : 12:05PM
willywilly: I am aware of the problems that vacuum cleaners can pose to delicate electronics.
One of the stores near me sells fresh new P4 fan/heat sink assemblies for 20$ CDN even. But they don't come with the grease/paste and I want to make sure I install it proper;y. I have had the old fan for over a year and it is time for a new one I think.
As a related note. I am considering water cooling but have heard nothing but horror stories related to problems with leaking. I am sure I could seal the thing up so leaking would be impossible but is it even worth considering?
My computer has tons of fans and it does not run hot (it's next to an air conditioner). I just thought the water cooling would be a neat project.
The only problem with my research is that most kits do not come with enough water blocks (I have 2 graphics cards).
I think I will go with the new fan and the arctic silver, I did some research and it seems like everybody who tries it likes it.
The water cooling thing was just me thinking aloud.
 
RandomPrecision
Senior Member

Enjoy!
8175 Posts
3/06
Posted - Aug 7 2007 : 4:03PM
If you really want to do it, I think you should build a practice PC with just the bare minimum of hardware/software you need to run it. You might even be able to find one that someone is throwing out somehow. Just install a basic watercooling system on it and see how it goes. You don't want to risk your main system on your first attempt. In fact, if you've never swapped a heatsink before, you would want to practice that first as well. I hear that if you don't apply the paste just right, you can fry your processor. It's extra work and probably extra money but it always pays to do a dry run before you risk anything really expensive.
All Forums > Tech Talk > Tech Talk Forum Page 32Does anyone know of a (preferably free) benchmark

Previous topic: threads not alligning correctly
Next topic: MP3 player with voice recorder



Jump To: